For Top Binding - Kyocera Mita TASKalfa 250ci Operation Manual

Copying Functions
For binding on the right side
Original

For top binding

Original
The procedure for using Booklet copying is explained below.
Ready to copy.
Booklet
Off
1-sided
Place original.
>>Booklet
2-sided
>>Booklet
Book
Original : ---
>>Booklet
Zoom :
100%
Paper : ---
Preview
Add Shortcut
Status
4-30
Copy
Copy
Copies
Original
Off
Binding
Left/Right
Cover
Binding
Top
Off
Finishing
Saddle
Binding
Stitch
Left
Binding
Top Edge Top
Right
Original
Binding
Orientation
Top
Cancel
OK
10/10/2008
The folded copies can be read from right to left.
The folded copies can be read from top to bottom.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
10:10
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
OPERATION GUIDE