System Initialization - Kyocera Mita TASKalfa 250ci Operation Manual

System Initialization

Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION:
System initialization will erase Custom Document Boxes, data stored in Document Box, addresses
in the Address Book, user property, account information, and settings.
NOTE:
This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security
Kit (E) OPERATION GUIDE on the bundled CD-ROM about the functions added when the Data Security Kit is
installed and related procedures.
Using KM-NET VIEWER allows you to backup addresses in the Address Book.
Adjustment/Maintenance
Copy Density Adjustment:
Next
0
Print Density:
3
This will be formatted.
Are you sure?
Correcting Black Line:
Off
This process may take a while.
Display Brightness:
3
Yes
Status
OPERATION GUIDE
Send/Box Density Adjust.:
Next
0
Change
Execute
Change
No
1/2
Close
10/10/2008 10:10
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then
[Execute] of System Initialization.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4
When the confirmation screen appears, press
[Yes].
Initialization starts.
IMPORTANT: The Formatting... Do not turn off the
main power switch message appears during
initialization. Wait until initialization ends.
5
Once the initialization ends, the message Task is
completed. Turn the main power switch off and on.
appears. Turn the main power switch off.
8
8-85