File Name - Kyocera Mita TASKalfa 250ci Operation Manual

Copying Functions

File Name

Names a copy job. Add other information such as date and time or job number as necessary. You can check a
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
Ready to copy.
File Name Entry
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.

File Name

doc
Additional Info
Job No.
Job No.
Add Shortcut
Status
4-48
Copies
Date and Time
Cancel OK
10/10/2008
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name
Entry].
4
Press [File Name], enter the name for a copy job,
and press [OK].
To add date and time, press [Date and Time]. To
add job number, [Job No.]. Added information is
displayed in Additional Info.
NOTE:
The maximum length of the file name is
32 characters.
10:10
5
Press [OK].
6
Press the Start key to start copying.
OPERATION GUIDE