Paper Output - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)
Paper Mismatch Error
Select what to do when the selected paper size or type does not match paper size or type loaded in the specified
paper source while printing from the computer.
Ignore
Display Error
Use the procedure below to specify the settings for error handling.

Paper Output

Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
Top Tray
Tray A, Tray B*, Tray C*
Finisher Tray*
Job Separator
Tray 1 to 7*
*
NOTE:
Optional job separator, and document finisher or 3,000 sheet document finisher are required.
FAX RX data output can be specified when the optional fax kit is installed.
8-18
Item
The setting is ignored and the job is
printed.
Error message to cancel printing is
displayed.
Output Tray
Delivery on Top Tray of the machine.
Delivery to trays A to C in the optional
3,000 sheet document finisher.
Delivery on Tray set to the optional
document finisher.
Delivery on the optional job separator.
Delivery to trays 1 to 7 in the optional
mailbox (tray 1 is the top tray).
Select [Face Up] (print surface up) or [Face Down] (print surface
down) for paper orientation at output.
Description
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Error
Handling.
3
Press [Change] at the error you wish to change the
handling.
4
Select the error handling method in the selection
screen for each of the errors and then press [OK].
5
The previous screen appears. To set the handling
for a different error, repeat steps 3 and 4.
Descriptions
OPERATION GUIDE