Color Balance Adjust - Kyocera Mita TASKalfa 250ci Operation Manual

Copying Functions

Color Balance Adjust

Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE:
This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-13).
This feature can not be used together with One touch Image Adjust (see page 4-19).
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust color balance.
Ready to copy.
Color Balance
Off
On
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
4-16
Copies
Cyan -5 -4 -3 -2 -1 0 1 2 3 4 5
Magenta -5 -4 -3 -2 -1 0 1 2 3 4 5
Yellow -5 -4 -3 -2 -1 0 1 2 3 4 5
Black -5 -4 -3 -2 -1 0 1 2 3 4 5
Cancel OK
10/10/2008
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [Color
Balance].
4
Press [On].
10:10
5
Press [ ] or [
adjusted (Cyan, Magenta, Yellow, Black) to adjust
each color.
6
Press [OK].
7
Press the Start key. Copying begins.
] on each side of the color to be
OPERATION GUIDE