Managing The Copier/Printer Counts - Kyocera Mita TASKalfa 250ci Operation Manual

Management
Account:
Account Name:
Change
01 Account
Account ID:
Change
00001000
Copy Restriction (Total):
Change
Off
Copy Restr. (Full Color):
Change
Off
Copy Restr. (SingleColor):
Change
Off
Status

Managing the Copier/Printer Counts

You can select how the copying and printing page counts are shown - either the total of both or each of copying
and printing individually. The selection may influence restriction on the count and count method. Refer to
Restricting the Use of the Machine on page 11-15, Counting the Number of Pages Printed on page 11-20 and
Printing an Accounting Report on page 11-24 for details.
Use the procedure below to set the counting methods.
11-14
Print Restrict. (Total):
Change
Off
Print Restrict. (Color):
Change
Off
1/2
Cancel Register
10/10/2008 10:10
Changing account information
1 Press [Detail].
2 Refer to steps 5 to 7 of Adding an Account and
steps 2 to 5 of Restricting Using the Machine
to change account information.
3 Press [Register].
4 Press [Yes] in the registration confirmation
screen. The account information is changed.
Deleting an account
1 Press [Delete].
2 Press [Yes]. To delete the account.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting and then [Change] of Copier/Printer
Count.
5
Press [Total] or [Split].
6
Press [OK].
OPERATION GUIDE