Canceling Jobs - Kyocera Mita TASKalfa 250ci Operation Manual

Basic Operation

Canceling Jobs

Follow the steps below to cancel any print or send job being executed.

Canceling Jobs

You can also cancel jobs by pressing the
Printing jobs
Sending jobs
Copying...
Job No.: 000021 Job Name:
Scanner Setting
Scanned Pages
2
Letter
100%
2-sided
Top Edge Top
Status
3-46
Stop
Copies
Doc10102008101031 User Name: -----
Printer Setting
Copies
2/
Letter Plain
2-sided
Collate
Top Tray
Cancel Reserve Next
10/10/2008
key.
1
Press the Stop key.
Cancelling job screen appears.
The current print job is temporarily interrupted.
2
Select the job you wish to cancel and press
[Cancel]. And then press [Yes] in the confirmation
screen.
1
Press the Stop key.
A status screen is displayed.
NOTE:
Pressing the Stop key will not temporarily stop
a job that you have already started sending.
2
To cancel printing, select [Cancel], and then press
[Yes] in the confirmation screen.
NOTE:
If Reserve Next Priority (refer to page 8-34) is set to
[Off]
24
The Copying screen appears in the touch panel during
printing.
1
Press the Stop key or [Cancel].
The current print job is cancelled.
10:10
OPERATION GUIDE