Interrupt Clear Timer - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds).
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.

Interrupt Clear Timer

Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 459 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
8-68
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Auto
Error Clear.
3
Press [Off] or [On].
4
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Date/Timer], [
Error Clear Timer.
3
Press [+] or [–] to enter the time until printing
restarts.
You cannot use the number keypad to enter this
value.
4
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Date/Timer], [
Interrupt Clear Timer.
3
Press [+] or [-] to enter the time for the interrupt
clear timer.
4
Press [OK].
] and then [Change] of
] and then [Change] of
OPERATION GUIDE