Use the procedure below to specify the setting for correcting fine black lines.
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
Refer to System Initialization on page 8-85 about the initialization procedures.
Display Brightness
Set the brightness of the touch panel.
Use the procedure below to adjust the display brightness.
Silent Mode
Make the machine run more quietly. Select this mode when the running noise is uncomfortable.
Use the procedure below to set Silent mode.
OPERATION GUIDE
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and
[Change] of Correcting Black Line.
3
Press [Off], [On(Low)] or [On(High)].
4
Press [OK].
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and
[Change] of Display Brightness.
3
Press [1] - [4] (Darker- Lighter) to adjust brightness.
4
Press [OK].
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and
[Change] of Silent Mode.
3
Press [Off] or [On].
4
Press [OK].
8
8-55