Checking The Remaining Amount Of Toner And Paper - Kyocera Mita TASKalfa 250ci Operation Manual

Status / Job Cancel

Checking the Remaining Amount of Toner and Paper

Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
Status
Toner Information
Paper
Toner Status Size
Black (K) Ledger
100%
Cyan (C) 100% Ledger
Magenta (M) Letter
100%
Yellow (Y) Letter
100%
Waste Toner OK Letter
Printing Jobs Sending Jobs
Status
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner as one of 11 levels from 100 to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source.
Others
You can check the status of staples and punch waste box.
NOTE:
If the optional document finisher or 3,000 sheet document finisher and punch unit are installed, the
Others section provides the status of the punch waste box and whether or not staples are available.
7-16
Others
Type Status Type
Plain 30% Staple A OK
Plain 30%
Plain 30%
Plain 30%
Plain 0%
Device/
Storing Jobs Paper/Supplies
Communication
10/10/2008
1
Press the Status/Job Cancel key.
2
Press [Paper/Supplies] to check the remaining
amount of toner, paper, and staples.
Status
10:10
OPERATION GUIDE