Sharpness - Kyocera Mita TASKalfa 250ci Operation Manual

Sending Functions

Sharpness

Select the sharpness of the image outline.
The table below shows the available settings.
Sharpen
Unsharpen
NOTE:
You cannot specify the sharpness if you selected [Black & White] in Color / Grayscale / Black and
White Selection (see page 5-24).
Use the procedure below to set the sharpness when sending scanned images.
Ready to send.
Place original.

Sharpness

Place original.
Unsharpen
-3 -2
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
5-22
Item
Emphasize the image outline. Make letters and
lines appear sharper.
Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Destination
Sharpen
-1 0 +1 +2 +3
Cancel OK
10/10/2008 10:10
Detail
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Sharpness].
4
Press [-3] to [+3] (Unsharpen - Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE