Background Density Adjustment - Kyocera Mita TASKalfa 250ci Operation Manual

Background Density Adjustment

Lightens the background of the colored original when it is too dark.
NOTE:
You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-24).
Use the procedure below to set the background density when sending scanned images.
Ready to send.
Place original.
Background Density Adj.
Background
Off
On
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Destination
Lighter Darker
1 2 3 4 5
Cancel OK
10/10/2008 10:10
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Background
Density Adj.].
4
Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Sending Functions
5
5-23