Correcting Fine Black Lines - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)
Adjustment / Maintenance - Drum Refresh
Clear image blur or white dots appear on the image.
Status

Correcting Fine Black Lines

Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
optional document processor used.
Paper feed
direction
The table below shows the available settings.
Off
On(Low)
On(High)
NOTE:
Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to
keep the default ([Off]).
8-54
Cancel Execute
10/10/2008 10:10
Item
No correction performed.
Correction performed. The reproduction of
the image becomes lower when using Off.
Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).
4
Press [Execute] to Drum Refresh.
5
After Drum Refresh is completed, press [OK] to
return to the Adjustment/Maintenance screen.
Description
OPERATION GUIDE