Copying - Kyocera Mita TASKalfa 250ci Operation Manual

Basic Operation

Copying

Follow the steps as below for basic copying.
Ready to copy.
Copy Image
Place original.
Auto
Paper
Original : ---
Selection
Zoom : 100%
2-sided
---
Paper :
>>2-sided
Preview Duplex
Quick Setup Org./Paper/
Finishing
Status
3-12
Copies
Shortcut 1
Shortcut 2
Shortcut 3
100% Normal 0
Shortcut 4
Zoom Density
Shortcut 5
2 in 1 Off
Shortcut 6
Combine Staple/Punch
Color/ Layout/Edit Advanced
Image Quality Setup
10/10/2008
1
Press the Copy key when the Copy key/indicator
is off.
NOTE:
If the touch panel is turned off, press the
Power key and wait for the machine to warm up.
2
Place the originals on the platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-29.
3
Check that [Auto] is selected of Paper Selection on
the touch panel. Paper that matches the size of the
original will be selected automatically.
To change the paper size, press, [Org./Paper/
Finishing], [Paper Selection] and select the desired
paper source.
NOTE:
Select paper size manually, if necessary,
instead of using automatic paper selection.
10:10
4
Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
5
Press the Start key to start copying.
6
Remove the finished copies from the top tray.
OPERATION GUIDE