Reserve Copy - Kyocera Mita TASKalfa 250ci Operation Manual

Reserve Copy

This function allows you to reserve the next copy job during printing.
Using this function, the original will be scanned while the machine is printing.
When the current print job ends, the reserved copy job is printed.
The procedure differs depending on the Reserve Next Priority (refer to page 8-34) Settings.
If Reserve Next Priority is set to [On]
The Copy function default screen appears on the touch panel during printing.
Ready to copy.
Copy Image
Place original.
Auto 100%
Paper Zoom
Original : ---
Selection
Zoom : 100%
2-sided 2 in 1
Paper : ---
>>2-sided
Preview
Duplex Combine
Quick Setup Org./Paper/ Color/
Finishing Image Quality
Status
If Reserve Next Priority is set to [Off]
The Copying screen appears on the touch panel during printing.
Copying...
Job No.: 000021 Job Name: Doc10102008101031
Scanner Setting
Scanned Pages
2
Letter
100%
2-sided
Top Edge Top
Status
OPERATION GUIDE
1
Copies
Shortcut 1
Shortcut 2
Shortcut 3
Normal 0
Shortcut 4
Density
Shortcut 5
Off
Shortcut 6
Staple/Punch
Layout/Edit Advanced
Setup
10/10/2008 10:10
2
1
Copies
User Name: -----
Printer Setting
Copies
2/ 24
Letter Plain
2-sided
Collate
Top Tray
Cancel Reserve Next
10/10/2008 10:10
2
3
Place the originals onto the machine for reserving
copy, and configure the copy settings.
Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
Press [Reserve Next].
The default screen for copying appears.
Place the originals onto the machine for reserving
copy, and configure the copy settings.
Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
Basic Operation
3
3-21