Changing User Properties - Kyocera Mita TASKalfa 250ci Operation Manual

Changing User Properties

User properties can be changed. Types of user properties that could be changed may be different depending
on user access privilege.
For a user with administrator rights who logs in
User properties can be changed and users can be deleted. The items, which can be added, are all able to be
changed.
Use the procedure below to change the user properties.
User:
User Name:
Change
01 User
Login User Name: Change
0099
Access Level:
Change
User
Change
E-mail Address:
abcd@efg.com
Status
OPERATION GUIDE
Login Password:
Change
**********
Account Name: Change
02 Account
IC Card Information: Change
Empty
Cancel Register
10/10/2008 10:10
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4
Press [Next] of User Login Setting and [Register/
Edit] of Local User List.
5
Select the user whose properties you wish to
change.
NOTE:
Select [Name] and [Login Name] from the Sort
pull-down menu to sort the user list.
Press [Search(Name)] or [Search(Login)] to search by
name or login user name.
The procedure differs depending on the details to
be edited.
Changing user information
1 Press [Detail].
2 Refer to steps 6 to 17 of Adding a User to
change a user property.
3 Press [Register].
Management
11
11-7