Default Setting (System Menu)
IPP Setup
Select whether or not to use IPP and set the port number to be used. The default setting is "Off, Port number:
631".
Use the procedure below to setup the IPP setting.
System - IPP
Use IPP to receive documents.
Off
On
Status
8-92
(1 - 65535)
100
Cancel
OK
10/10/2008
10:10
1
Press the System Menu key.
2
Press [System], [Next] of Network, [
then [Change] of IPP.
3
Press [On] or [Off].
Press [+] or [-] to change the port number as
desired. You can enter any port number between 1
and 65535.
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-86.
] (twice) and
OPERATION GUIDE