1-Sided/2-Sided Selection - Kyocera Mita TASKalfa 250ci Operation Manual

1-sided/2-sided Selection

Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
1-sided Sheet Original
2-sided Sheet Original
Open Book Original such
as magazine and book
*
Use the procedure below to select the original type and binding direction when sending scanned originals.
Ready to send.
Place original.
2-sided/Book Original
1-sided
2-sided
Place original.
Left
Book
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Original
1-sided
2-sided*
Book
Only when the optional document processor is used.
Destination
Right
Top Edge Top
Original
Orientation
Cancel OK
10/10/2008 10:10
Type Binding
—
Binding Left/Right,
Binding Top
Binding Left,
Binding Right
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then [2-
sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
If you selected [2-sided] or [Book], you should also
select the binding direction and press [Original
Orientation] to select the direction in which the
original is set on the platen.
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
Sending Functions
5
5-11