Repeat Copy Box - Kyocera Mita TASKalfa 250ci Operation Manual

Document Box

Repeat Copy Box

Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Use the procedure below to specify the maximum number of stored jobs.
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
Status
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below to print a document.
6-14
(0 - 50)
32
job(s)
Cancel OK
10/10/2008
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Job Box, [Change] of Repeat Copy Job
Retention.
3
Use the [+] and [–] keys or the numeric keys to
enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
10:10
NOTE:
If you enter a value of 0 (zero), you cannot use
the Repeat Copy function.
4
Press [OK]. The maximum number of stored jobs is
set.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
OPERATION GUIDE