Deleting Applications - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)

Deleting Applications

Use the procedure below to delete an installed application.
IMPORTANT: Always exit the application to be deleted before deleting the application. (Refer to Starting/Exiting
Application Use on page 8-81.)
Application
Manage the applications.
Name Version
Application 1 ---
Application 2 ---
Application 3 ---
Print
Report
Status
8-84
Status License
Add
Activating Official
Delete
Stopped Official
Activating Trial
1/1
License
On
License
Off
Detail
Close
10/10/2008
Once the installation ends, the original screen
reappears.
7
To install another application, repeat steps 5 to 6.
8
To remove the USB memory, press [Remove
Memory] and wait until the Removable Memory can
be safely removed message appears. Then
remove the USB memory.
1
Press the System Menu key.
2
Press [ ] and then [Application].
NOTE:
If login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this,
you need to log in with administrator privileges. Refer
to Adding a User on page 11-4 for the default login user
name and password.
3
Select the application to be deleted and press
[Delete].
You can view detailed information on the selected
application by pressing [Detail].
10:10
4
When the deletion confirmation screen appears,
press [Yes]. The application is deleted.
OPERATION GUIDE