Wsd Scan - Kyocera Mita TASKalfa 250ci Operation Manual

Sending Functions

WSD Scan

WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE:
For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-93) must be set to On in the network settings.
Procedure using this machine
WSD Scan - Selecting Computer
Select the destination computer and press [OK].
Computer Name
pc00010
pc000102
pc000103
pc000104
pc000105
Status
5-30
1/1
Detail
Cancel Back Next
10/10/2008
1
Press the Send Key.
2
Place the originals in the document processor or on
the platen.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3
Press [WSD Scan].
4
Press [From Operation Panel].
10:10
5
Select the destination computer from the computer
list and press [OK].
You can view information on the selected computer
by pressing [Detail].
6
Press [OK].
7
Press the Start key. Sending begins.
NOTE:
To use WSD Scan from your computer, press
[From Computer] in step 4 and then scan the original
from the computer.
OPERATION GUIDE