Table of Contents
Advertisement
Default Setting (System Menu)
Date/Timer
Date/Timer settings include:
•
Date/Time ...8-64
•
Date Format ...8-65
•
Time Zone ...8-65
•
Auto Panel Reset ...8-65
•
Low Power Timer ...8-66
•
Auto Sleep ...8-67
•
Auto Error Clear ...8-67
•
Interrupt Clear Timer ...8-68
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION:
Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
8-64
1
Press the System Menu key.
2
Press [
], [Date/Timer] and then [Change] of
Date/Time.
3
Press [+] or [–] to enter the date and time
respectively.
NOTE:
If you try to change the date/time when a trial
application (page 8-102) is running, the If you change
Date/Time setting, trial functions will be unavailable.
Are you sure? message is displayed. To change the
date/time, press [Yes].
OPERATION GUIDE
Advertisement
Chapters
Table of Contents
