Adjustment/Maintenance; Copy Density Adjustment - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
•

Copy Density Adjustment ...8-52

• Send/Box Density Adjust ...8-53
• Print Density ...8-53
• Drum Refresh ...8-53
• Correcting Fine Black Lines ...8-54
• System Initialization ...8-55
• Display Brightness ...8-55
• Silent Mode ...8-55
• Auto Color Correction...8-56
• Color Registration...8-56
• Setting the Color Calibration Cycle...8-60
• Gray Adjustment...8-60
• Color Calibration...8-62
• Developer Refresh...8-63
• Laser Scanner Cleaning...8-63
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
8-52
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Next] of
Copy Density Adjustment.
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
OPERATION GUIDE