Error Handling; Switching Unit Of Measurement - Kyocera Mita TASKalfa 250ci Operation Manual

Default Setting (System Menu)

Switching Unit of Measurement

Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.

Error Handling

Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
1-sided
Display Error
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
Ignore
Display Error
8-16
Item
Printed in 1-sided
Error message to cancel printing is
displayed.
Processing
The setting is ignored and the job is
printed.
Error message to cancel printing is
displayed.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of
Measurement.
3
Select [mm] for metric or [inch] for inch.
4
Press [OK].
Description
Description
OPERATION GUIDE