Sharpness Adjust - Kyocera Mita TASKalfa 250ci Operation Manual

Copying Functions

Sharpness Adjust

Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such
as magazine phots, in which moire
obtained by setting the sharpness toward [Unsharpen].
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust sharpness.
Ready to copy.
Sharpness
Place original.
Unsharpen
-3 -2
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
†Patterns that are created by irregular distribution of halftone dots.
4-20
†
patterns appear, edge softening and weakening of the moire effect can be
Copies
Sharpen
-1 0 +1 +2 +3
Cancel OK
10/10/2008 10:10
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then Press
[Sharpness].
4
Press [-3] to [3] (Unsharpen - Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Press the Start key. Copying begins.
OPERATION GUIDE