Section 9: Applications; Application Function Menu - Kyocera Mita Vi7360 Instruction Handbook Manual

Applications

Application Function Menu

When key on the Basic Screen is touched, the Application Selection Screen
APPLI.
displays on the touch panel. If one function on the menu is incompatible with another, it
will appear dimmed. The function always dimmed on the screen is now under
development.
When a function key is touched, it becomes highlighted. If you touch a function key,
another screen or two will display to enable you to enter the appropriate settings. For
example, you may select Repeat from the Application Selection Screen and then choose
a desired repeat image mode, another screen will display when you touch
ENTER
, which allows you to specify the repeat width using the
REPEAT WIDTH BY KEYPAD
touch screen keypad.
When all settings are made for each function, the key can be touched to complete
OK
the settings, and return you to the Application Selection Screen. If no other Applications
are desired, the key can be touched again to complete your selections, and bring you
OK
back to the Basic Screen. With the Basic Screen displayed, you can press the [ ]
START
key to perform the operation.
To restore the original copying conditions, touch .
CANCEL
To clear all Application settings, touch .
ALL CLEAR
Basic Screen Application Selection Screen
NOTES:
1 The APPLI. key on the Basic Screen will be highlighted when application selections have been made.
2 When incompatible selections are made, the last key touched will be selected.
3 To cancel individual functions in application mode, touch the highlighted key.
To cancel all application selections, touch ALL CLEAR key on the Application Selection Screen.
9-2 Applications