Replacing The Toner Container And Waste Toner Tank - Kyocera Mita KM-1510 Instruction Handbook Manual

CHAPTER 3 PREPARATIONS BEFORE USE

3. Replacing the toner container and waste toner tank

When the level of toner becomes low, the Add Toner indicator flashes.
If you continue copying with the Add Toner indicator flashing, the
indicator eventually remains lit and a toner replacement message will
be printed out. When the message is printed, replace the toner
container and waste toner tank immediately. Be sure to replace the
waste toner tank when replacing the toner container. Use the new
waste toner tank that is supplied with the toner container.
The toner replacement message is as follows:
"Replace waste toner tank at the time of toner container exchange
surely, and do charge wire cleaning."
* Replenish toner only when the Add Toner indicator is lit.
(English text panel)
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
3-7
(Symbol panel)
1 Open the front cover.
2 Remove the waste toner tank.
3 Close the opening of the waste toner tank with its seal.
1
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
2