Traffic Control - Draytek Vigor2130 series User Manual

Source IP Address
Source IP Mask
Dest IP
Dest IP Address
Dest IP Mask
4 . 4 . 4 T r a f f i c C o n t
4 . 4 . 4 T r a f f i c C o n
There are some limitations that transmitting and receiving packets through WLAN or VPN
tunnel cannot be controlled well in hardware. The function of Traffic Control is designed
specifically to customize firewall rule for managing the traffic in and out.
Available settings are explained as follows:
Item
Enable Traffic Control
Add Entry
address in the source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the source IP
Address and source IP Mask fields that appear.
Type the source IP Address here. This option is available
when you choose Host or Network as source IP Filter.
Type the source IP Mask here. This option is available only
when you choose Network as source IP.
Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the destination IP Address field
that appears.
Network: Destination IP is set to Network. Specify the
destination IP address and destination IP mask in the
destination IP address and destination IP mask fields that
appear.
Type the Dest IP Address here. This option is available
when you choose Host or Network as destination IP filter.
Type the Dest IP Mask here. This option is available only
when you choose Network as destination IP filter.
r o l
t r o l
Description
Check the box to enable such function.
Click it add a new firewall rule.
132
Vigor2130 Series User's Guide