3.
Verify current routing table.
4
.
2
.
7
P
o
l
i
c
e
R
o
u
t
4
.
2
.
7
P
o
l
i
c
e
R
o
u
t
Go to LAN to open setting page and choose Police Route.
Available settings are explained as follows:
Item
Set to Factory Default
Clear Routing Cache
Index
Source Address
Destination Address
Gateway
Interface
NAT
Status
Add
e
e
Description
Click this link to return to the factory default settings.
Click this link to clear all the routing cache.
The number (1 to 10) under Index displays current policy
router.
Display the source address of the policy route.
Display the destination address of the policy route.
Display the gateway IP address for the policy route.
Display the interface used by such policy route.
Display if NAT is done for source subnet or not.
Display the status of the static route.
Click it to add a new static route.
104
Vigor2130 Series User's Guide