Draytek Vigor2130 series User Manual page 247

A d d i n g
A d d i n g
Click Add New Rule to configure a new rule for IPv6 Firewall.
Note: You can set up to 20 sets of IPv6 rules.
Available settings are explained as follows:
Item
Name
Protocol
Source IP Type
Source IP / Choose PC
Source Subnet / Choose
Subnet
Destination IP Type
Vigor2130 Series User's Guide
a N e w R u l e
a N e w R u l e
Description
Type a name for the rule.
Specify a protocol for this rule.
Determine the IP type as the source.
Type the IPv6 address here if you choose Single as Source
IP Type. Or click Choose PC to select an Ipv6 address.
Type the subnet mask here if you choose Subnet as Source
IP Type. Or click Choose Subnet to select an Ipv6 subnet.
Determine the IP type as the destination.
239