Ipsec Remote Dial-In - Draytek Vigor2130 series User Manual

4 . 8 . 3 I P S e c R e
4 . 8 . 3 I P S e c R
This page allows you to configure IPSec Site-to-Client settings.
Available settings are explained as follows:
Item
Mobile VPN Type
Vigor2130 Series User's Guide
m o t e D i a l - i n
e m o t e D i a l - i n
Description
This usually applies to those are remote dial-in user or node
(LAN-to-LAN) which uses dynamic IP address and
IPSec-related VPN connections such as L2TP over IPSec
and IPSec tunnel.
Disabled – Ignore the configurations set in this page.
Dynamic VPN (IPSec) – Traffic between this subnet and
the client will travel through the VPN tunnel. If you choose
this type, please specify the IP address and subnet mask for
local network.
L2TP/IPSec –The range must not overlap the DHCP
address range (if enabled), and must allow for at least one
IP address. Example: 10.10.137.240-10.10.137.245. If you
choose this type, please specify the IP address range for
L2TP/IPSec mode.
173