Setting Up The Wireless Connection - Draytek Vigor2130 series User Manual

Item
Subnet Mask
Redial Policy
Idle Time Out
MTU Size
Enable
Clone MAC Address
After finishing the settings here, please click Next.
2 . 3 . 4 S e t t i n g u
2 . 3 . 4 S e t t i n g u
Now, you have to set up the wireless connection. For the user of Vigor2130, please skip this
step.
Available settings are explained as follows:
Item
Enable Wireless LAN
SSID Broadcast
Vigor2130 Series User's Guide
Description
Type the subnet mask if you chose Static IP as the WAN IP.
If you want to connect to Internet all the time, you can
choose Always On. Otherwise, choose Connect on
Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action.
It means Max Transmit Unit for packet. The default setting
will be specified by the system automatically. Therefore,
keep this field in blank.
The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
It is available when the box of Enable is checked. Click
Clone PC Address. The result will be displayed in the field
of MAC Address.
p t h e W i r e l e s s C
p t h e W i r e l e s s C
Description
Check the box to enable the wireless function.
Choose Show to make the SSID being seen by wireless
clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your
wireless LAN.
o n n e c t i o n
o n n e c t i o n
23