Lan To Lan - Draytek Vigor2130 series User Manual

Login Time
Rx bytes
Tx bytes
4 . 8 . 5 L A N t o L A N
4 . 8 . 5 L A N t o L A N
Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
You may set parameters including specified connection peer ID, connection type and
corresponding security methods, etc.
The router supports two VPN tunnels for IPSec and PPTP by providing up to 2 profiles. The
following figure shows the summary table.
Available settings are explained as follows:
Item
Auto-refresh
Refresh
Name
Endpoint
IKE Alg
ESP Alg
Tx Packets / Tx Bytes
Rx Packets / Rx Bytes
Display the system time that the user logs in.
Display the data total received for such client.
Display the data total transmitted for such client.
Description
Check this box to make the system refresh this page
automatically.
Click this button to refresh the page immediately.
Indicate the name of the LAN-to-LAN profile.
Display the IP address of the VPN client.
Display the encryption and authentication algorithm used
during phase 1 of the VPN connection Establishment. The
algorithm is used during exchange of key exchange.
Display the encryption and authentication algorithm used
during phase 2 of the VPN connection Establishment. This
algorithm is used for transporting data, and the choice will
affect the performance of the VPN tunnel.
Display the data transmission packets / bytes through VPN
tunnel (by IPSec or PPTP).
Display the data receiving packets / bytes through VPN
tunnel (by IPSec or PPTP).
176
Vigor2130 Series User's Guide