Vlan - Draytek Vigor2130 series User Manual

To add a new static MAC entry, click Add new static entry. A new entry will be shown as
follows. Choose a VLAN ID and type a new MAC address. Next, specify port member for
this table. Finally, click OK to save the changes.
4 . 2 . 4 V L A N
4 . 2 . 4 V L A N
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to LAN page
and select VLAN. The following page will appear. VLAN function is enabled in default.
Add New Private VLAN
To add or remove a VLAN, please refer to the following example.
1. VLAN 1 is consisted of hosts linked to P1 ~ P4.
2. After checking the box to enable VLAN function, you will check the table according to
the needs as shown below.
setting.
Click this button to add a new private VLAN. The router allows
you to add up to 4 VLAN.
100
Vigor2130 Series User's Guide