Access Point Discovery - Draytek Vigor2130 series User Manual

4 . 1 0 . 5 A c c e s s P o
4 . 1 0 . 5 A c c e s s P o
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage.
Note: During the scanning process (about 5 seconds), no client is allowed to connect to
Vigor.
The table will list channel, SSID, BSSID, Security and the Signal strength of working APs in
the neighborhood.
Available settings are explained as follows:
Item
CH
SSID
BSSID
Security
Signal
Scan
Add to
i n t D i s c o v e r y
i n t D i s c o v e r y
Description
Display the channel for the scanned AP.
Display the SSID of the scanned AP.
Display the MAC address of the scanned AP.
Display the encryption type of the scanned AP.
Display the strength (in percentage) of the signal of the
scanned AP.
It is used to discover all the connected AP. The results will
be shown on the box above this button.
If you want the found AP applying the WDS settings, please
type in the AP's MAC address on the bottom of the page and
click Bridge or Repeater. Next, click Add to. Later, the
MAC address of the AP will be added on WDS settings
page.
198
Vigor2130 Series User's Guide