Ipv6 Neighbour - Draytek Vigor2130 series User Manual

4 . 1 3 . 5 I P v 6 N e
4 . 1 3 . 5 I P v 6 N e
IPv6 uses neighbor discovery protocol to find out neighbors on the same link.
Each item is explained as follows:
Item
Device
IP Address
MAC Address
State
Auto-refresh
Refresh
Vigor2130 Series User's Guide
i g h b o u r
i g h b o u r
Description
The interface name of the link where the neighbor is on.
The IPv6 address of the neighbor.
The link-layer address of the neighbor.
Possible states include:
incomplete - address resolution is in progress.
reachable - neighbor is reachable.
stale – neighbor(s) may be unreachable but not verified
until a packet is sent).
delay - neighbor may be unreachable and a packet was sent.
probe - neighbor may be unreachable and probes are sent to
verify the reachability.
Check this box to enable an automatic refresh of the page at
regular intervals.
Click it to reload the page.
243