Draytek Vigor2130 series User Manual page 125

Counter
Refresh
Clear
Click OK to save the settings.
R a t e L i
R a t e L i
Configure the rate limiter for the ACL (Access Control List) of the router. Please click Rate
Limiter ID link to access into the following page.
Available settings are explained as follows:
Item
Rate Limiter ID
Rate
Vigor2130 Series User's Guide
Disabled.
Counts the number of frames that match this Access
Control Entry (ACE).
Click this button to refresh the number of the counter
immediately.
Click this button to clear the number of the counter on this
page.
m i t e r I D
m i t e r I D
Description
Rate limiter ID will be applied to WAN port and LAN port.
Please specify a rate number for each ID. The default
setting is "1"(packet per second).
Define the rate by choosing from the following drop down
117