Sessions Table - Draytek Vigor2130 series User Manual

The horizontal axis represents time. Yet the vertical axis has different meanings. For WAN1
Bandwidth chart, the numbers displayed on vertical axis represent the numbers of the
transmitted and received packets in the past.
For Sessions chart, the numbers displayed on vertical axis represent the numbers of the NAT
sessions during the past.
4 . 1 6 . 1 2 S e s s i o n s
4 . 1 6 . 1 2 S e s s i o n s
Click Diagnostics and click Sessions Table to open the list page. This page displays the
session information for UDP and/or TCP. Also, you can specify the IP range to observe the
corresponding information for your necessity.
Each item is explained as follows:
Item
Page
Auto-refresh
Refresh
Shall ALL
Protocol
Source IP: Port /
Dest IP: Port
State
Search
T a b l e
T a b l e
Description
Allow to choose the page to be displayed on this screen.
Check it to enable auto-refresh function.
Click it to reload the page.
Check this box to display all of the data via UDP and TCP.
Choose one of the protocols to be displayed the
corresponding information in this page.
You can check a range of certain devices by specifying the
source and destination IP address (es) with the port number.
Display the sessions based on the state chosen here.
Click this button to search the information based on the
276
Vigor2130 Series User's Guide