Draytek Vigor2130 series User Manual page 222

Available settings are explained as follows:
Item
Enable Temperature
Sensor
Display Unit
Temperature Alert
Calibration
Send Temperature Log to
Syslog Agent
Send Alert to E-Mail.
Send alarm to the SMS app
SMS Profile
OK
Cancel
Below shows an example of temperature graph:
Current temperature, maximum temperature, minimum temperature and average temperature
will be displayed on the screen.
Description
Enable – Enable the function of temperature sensor.
Disable – Disable the function.
Choose the display unit of the temperature. There are two
types for you to choose.
Type the upper limit and lower limit for the system to send
out temperature alert.
Type a value used for correcting the temperature error.
Check the box to enable this function. The temperature log
will be recorded on Syslog.
Check the box to enable this function. The alert will be sent
to the e-mail address that you offer on the page of System
Maintenance>>Syslog / Mail Alert Setup.
Check the box to enable this function.
Use the drop down list to choose a SMS profile for sending
the alarm.
Save the settings.
Cancel the settings.
214
Vigor2130 Series User's Guide