Draytek Vigor2130 series User Manual page 85

WAN Connection
Detection
Clone MAC Address
Mail/SMS Alert
Vigor2130 Series User's Guide
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the router will automatically apply default DNS
Server IP address: 194.109.6.66 to this field.
Secondary DNS Server-You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the router will automatically apply default secondary DNS
Server IP address: 194.98.0.1 to this field.
Redial Policy-If you want to connect to Internet all the
time, you can choose Always On. Otherwise, choose
Connect on Demand and
Idle Time Out-Set the timeout for breaking down the
Internet after passing through the time without any action.
When you choose Connect on Demand, you have to type
value here.
MTU Size-It means Max Transmit Unit for packet. The
default setting will be specified by the system
automatically. Therefore, keep this field in blank.
Fixed IP (IPCP)-Usually ISP dynamically assigns IP
address to you each time you connect to it and request. In
some case, your ISP provides service to always assign you
the same IP address whenever you request. In this case, you
can fill in this IP address in the Fixed IP field. Please
contact your ISP before you want to use this function. Click
Yes to use this function
Fixed IP Address (IPCP)-Type in a fixed IP address in the
box if you click Yes for Fixed IP(IPCP).
Mode -Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect. Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP-If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
Enable – Enable the feature.
It is available when the box of Enable is checked. Click
Clone MAC Address. The result will be displayed in the
field of MAC Address.
Alert Types – Specify the type of the alert (mail, SMS, or
Mail and SMS) that Vigor system will use to send a
message to the user.
77