Draytek Vigor2130 series User Manual page 34

If you choose WPA-Radius as the security configuration, you have to specify WPA mode,
algorithm, Radius server, Radius server port and Radius server secret respectively.
Available settings are explained as follows:
Item
Type
WPA Algorithm
Server IP Address
Destination Port
Shared Secret
Description
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
Choose the WPA algorithm, TKIP, AES or Auto.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
26
Vigor2130 Series User's Guide