Draytek Vigor2130 series User Manual page 154

Available settings are explained as follows:
Item
Enable
Disable
Default Sessions Limit
Limitation List
Start IP
End IP
Sessions Limit
Add
Edit
Delete
When you finish adding a new session limit, simply click OK.
Description
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer
in LAN.
Displays a list of specific limitations that you set on this
web page.
Defines the start LAN IP address for limit session.
Defines the end LAN IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
146
Vigor2130 Series User's Guide