Draytek Vigor2130 series User Manual page 176

Available settings are explained as follows:
Item
Enable
Profile Name
Service
Username
Password
Destination Number
Quota
Sending Interval
User-defined
Message
Send a test Message
Description
Check the box of Enable to enable SMS function.
Type a name for such SMS profile.
Use the drop down list to specify the service provider which
offers SMS service.
Type a user name that the sender can use to register to
selected SMS provider.
Type a password that the sender can use to register to
selected SMS provider.
Type the mobile phone number that you want it to receive
the SMS.
Type the total number of the messages that the router will
send out.
Type the shortest time interval for the system to send SMS.
For example, it is set with 60 (seconds). If WAN1
disconnects for three times within 60 seconds, the system
will send the SMS notification just for once.
Type a brief description which will be sent to the receiver
when such profile is enabled and selected.
Send one SMS to the user just for test.
168
Vigor2130 Series User's Guide