Usb Application; Disk Status - Draytek Vigor2130 series User Manual

Phy Mode
Click OK to save the settings.
4 . 1 1 U S B A p p
4 . 1 1 U S B A p p
USB storage disk can be regarded as an FTP server. By way of Vigor router, clients on LAN
can access, write and read data stored in USB storage disk. After setting the configuration in
USB Application, you can type the IP address of the Vigor router and username/password
created in USB Application>>FTP User Setting on the FTP client software. Thus, the client
can use the FTP site (USB storage disk) through Vigor router.
4 . 1 1 . 1 D i s k S t
4 . 1 1 . 1 D i s k S t
This page can display current using status of the USB storage disk. If you want to remove the
disk from USB port in router, please check the box of Safely Remove Disk first. And then,
remove the USB storage disk later.
Available settings are explained as follows:
Vigor2130 Series User's Guide
to be entered in this page at one time.
There are three types of transmission rates developed by
different techniques for Phy Mode. Data will be transmitted
via communication channel.
CCK – If 802.11b wireless mode is used, please choose such
type as the Phy Mode.
OFDM – If 802.11g wireless mode is used, please choose
such type as the Phy Mode.
HTMIX – If 802.11b/g/n wireless mode is used, please
choose such type as the Phy Mode.
Both clients (local and remote) must use the same Phy Mode
to have the same transmission rate.
l i c a t i o n
l i c a t i o n
a t u s
a t u s
203