1. Click Add Entry to open the following time object setting page.
Available settings are explained as follows:
Item
Enable
Name
Source IP
Mask
Action
Syslog
Description
Check the box to enable such rule.
Type a name of the rule for identification.
Type IP address in LAN. Packets passing through such IP
address will be filtered by the router.
Type the mask for the source IP.
Block – Packets matching with such rule will be blocked by
the router.
Pass – Packets matching with such rule are allowed to pass
through the router.
Check this box to record the information on Syslog.
144
Vigor2130 Series User's Guide