A
d
d
i
n
g
A
d
d
i
n
g
1.
Click Add a New User to open the following page.
Available settings are explained as follows:
Item
Enable
Username
Full Name
Password
Confirm Password
Allow Disk Sharing
Allow IPSEC/L2TP
Allow PPTP
Vigor2130 Series User's Guide
a
N
e
w
U
s
e
r
a
N
e
w
U
s
e
r
Description
Check this box to enable such user profile.
Type a name for this user.
Type full name for this user.
Type the password for this user.
Type the password again for confirmation.
Check this box to have the remote user share the disk
information.
Check this box to let the remote user connecting to this
device through IPSEC/L2TP.
Check this box to let the remote user connecting to this
device through PPTP.
When such user profile needs to have PPTP LAN to LAN
connection, the following three items must be adjusted.
Allowed Dial-In Type – Specify the type (Remote Dial-In
Client / LAN to LAN) for PPTP connection.
Assign Static IP Address – Type a static IP address if
remote Dial-In Client is selected as Dial-In Type.
Local Network / Mask –Traffic between this subnet and
the subnet specified in Remote Network / Mask will travel
through the VPN tunnel. Type the address(es) if LAN to
LAN is selected as Dial-In Type.
Remote Network / Mask –Add a static route to direct all
171