System Password - Draytek Vigor2130 series User Manual

Item
CPE Settings
Periodic Inform Settings
4 . 1 5 . 3 S y s t e m P a
4 . 1 5 . 3 S y s t e m P a
This page allows you to set new password for admin operation.
Available settings are explained as follows
Item
Old Password
Description
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServlet
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want to
use such CPE with VigorACS, you can type as the following:
Username: acs
Password: password
Test With Inform – Click it to send the event code specified
below for test.
Event Code – It is used to be sent out for test.
Last Inform Response Time: Display the response time for
the last notification.
Such information is useful for Auto Configuration Server.
Enable – Check the box to allow the CPE Client to connect
with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for CPE.
Username – Type a name for VigorACS to access into Vigor
router's web configurator.
Password –Type a password for VigorACS to access into
Vigor router's web configurator.
Enable – Check the box for the system to send inform
message to ACS server periodically (with the time set in the
box of interval time).
Interval Time - Please set interval time or schedule time for
the router to send notification to CPE. Or uncheck Enable to
close the mechanism of notification.
s s w o r d
s s w o r d
Description
Type in the old password. The factory default setting for
254
Vigor2130 Series User's Guide