Draytek Vigor2130 series User Manual page 131

RARP DMAC Match
IP/Ethernet Length
IP
Ethernet
Vigor2130 Series User's Guide
address.
1: means sender hardware address is equal to the SMAC
address.
Any: means any value is allowed.
Specify whether frames can hit the action according to their
target hardware address field (THA) settings.
0: means target hardware address is not equal to the SMAC
address.
1: means s target hardware address is equal to the SMAC
address.
Any: means any value is allowed.
Specify whether frames/packets can meet the action
according to the ARP/RARP hardware address length
(HLN) and protocol address length (PLN) settings.
0: means ARP/RARP frames/packets where the hardware
address length is equal to Ethernet (0x06) and the protocol
address length is equal to IPv4 (0x04) must not match this
entry.
1: means ARP/RARP frames/packets where the hardware
address length is equal to Ethernet (0x06) and the protocol
address length is equal to IPv4 (0x04) must match this
entry.
Any: Any value is allowed.
Specify whether frames/packets can meet the action
according to their ARP/RARP hardware address space
(HRD) settings.
0: ARP/RARP frames where the hardware address space is
equal to Ethernet (1) must not match this entry.
1: ARP/RARP frames where the hardware address space is
equal to Ethernet (1) must match this entry.
Any: Any value is allowed.
Specify whether frames can hit the action according to their
ARP/RARP protocol address space (PRO) settings.
123