Ports - Draytek Vigor2130 series User Manual

Available settings are explained as follows:
Item
PPPoE Setting
Mail/SMS Alert
After finishing all the settings here, please click OK to activate them.
4 . 1 . 3 P o r t s
4 . 1 . 3 P o r t s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Available settings are explained as follows:
Item
Port
Link
Speed
Description
Username - Type the name obtained from the ISP.
Password - Type the password obtained from the ISP.
Confirm Password -Type the password again for
confirmation.
MTU Size - It means Max Transmit Unit for packet. The
default setting will be specified by the system
automatically. Therefore, keep this field in blank.
Alert Types – Specify the type of the alert (mail, SMS, or
Mail and SMS) that Vigor system will use to send a
message to the user.
Event types – Specify the event when the system must send
a notification to the user by mail and/or SMS.
Description
It displays current network interface.
It displays current connection status. Green light means the
WAN connection is successful.
Current - It displays current speed that the router uses.
Configured - You can use the drop down list to choose the
required speed for the router. If you have no idea in
configuring speed, simple use the default setting, Auto.
88
Vigor2130 Series User's Guide