Draytek Vigor2130 series User Manual page 93

IPTV WAN VLAN
Setting
Management WAN
VLAN Setting
LAN VLAN Setting
Vigor2130 Series User's Guide
port will be tagged with VLAN ID number specified here.
The range of ID number you can type is from 2 - 4096.
VoIP WAN Setting – Click this link to open VoIP WAN
setting.
Vigor router supports IPTV application (traditional
television channel, movie or VoD service) through the
second WAN IP under PPPoE connection mode.
Enable IPTV WAN Setup - Check the box to enable
IPTV WAN configuration.
IPTV WAN VLAN ID - Voice sent out through the WAN
port will be tagged with VLAN ID number specified here.
The range of ID number you can type is from 2 - 4096.
IPTV WAN Setting – Click this link to open IPTV WAN
setting.
Enable Management WAN Setup - Check the box to
enable IPTV WAN configuration.
Management WAN VLAN ID - Voice sent out through
the WAN port will be tagged with VLAN ID number
specified here. The range of ID number you can type is
from 2 - 4096.
Management WAN Setting – Click this link to open
Management WAN setting.
LAN/NAT - Such value is constant and fixed. All the data
will be transmitted by NAT through WAN port.
Bridge 1/2/3 - LAN port (P2-P4) selected here will ask a
Public IP address from ISP for transmitting data from PC
directly without NAT. The range of ID number you can
type is from 2 – 4096. Each ID setting must be unique and
different with WAN VLAN ID.
85